Erez Matzrafi is an Israeli luthier who builds classical and flamenco guitars under the name EM Guitars. He has been making guitars since 2013. His development was shaped by the feedback of Israeli concert guitarists and by the mentorship of Andrea Tacchi. In 2026 Siccas Guitars presented two of his guitars of the Thucea model, which we presented as a tribute to Tacchi.
Background
Matzrafi began as a self-taught maker. His interest in building things started with model airplanes, and over the years guitar making grew from a hobby into his profession. Several Israeli classical guitarists, among them Yoram Zerbib, Tal Hurwitz and Ruben Seroussi, encouraged him and commented on his instruments, and he refined his work through their responses.
A turning point came when Tal Hurwitz brought him into contact with Andrea Tacchi. Tacchi became his mentor, and the collaboration changed the way Matzrafi thinks about sound, aesthetics and materials. Its influence shows in the thickness of his tops, in a response that he aims to make almost membrane-like, in double sides of cypress and in the balance between spruce and cedar.
Building approach and sound ideal
On his website Matzrafi describes the model he builds as inspired by the guitar of Andrés Segovia, the Hermann Hauser of 1937, and calls it a handcrafted traditional Spanish guitar, a concert instrument with a romantic sound. He names José Luis Romanillos as a maker who influenced him a great deal, and he quotes Romanillos's view that a Spanish guitar needs a clear, warm treble in which the voices stay separate, and a bass that resonates deeply.
In his own words, every guitar starts with the selection of the wood. He works with rosewood, cypress, spruce, cedar, mahogany, maple, ebony and padauk. He says he does not compromise on three things, the quality of the sound, the beauty of the guitar and playing comfort. His aim is a light instrument with high volume and good balance, a clear treble and a deep bass.
His concert model, listed on his website as Menorah, has a top of spruce or cedar, rosewood back and sides, a neck of mahogany or maple, a bridge of rosewood or padauk, a fingerboard of ebony or rosewood and a mosaic or olive-wood rosette. The flamenco version follows the same pattern with cypress back and sides. Both are finished in French polish.
Erez Matzrafi at Siccas Guitars
Siccas Guitars has presented two of Matzrafi's guitars of the Thucea model, both built in 2026. Each has a soundboard that combines spruce and cedar, back and sides of cypress, a 650 mm scale, a 52 mm nut and a French polish finish. The first appeared in January 2026 in our Weekly Guitar Meeting #191, where it was shown in the same episode as a 1994 guitar by Andrea Tacchi. The second followed in September 2026 in Weekly Guitar Meeting #228, and a short video on our main channel introduced it as a guitar built as a tribute to Tacchi.
In the ToneBank review below you can hear the first of the two instruments. If you want to know more about how the two top woods differ in sound, read our comparison of spruce and cedar classical guitars.





